AWWA Standards & Manuals

• ANSI/AWWA C651 Disinfecting Water Mains
• ANSI/AWWA C901-20 Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service
• AWWA C906-21 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 65 In. (100 mm Through 1,650 mm), for Waterworks
• AWWA M55: Manual for the Design and Installation of Polyethylene Pipe in water Applications.
• AWWA Pipe Profile Series- PE Pipe (DVD)
• C622-19 - Pipe Bursting of Potable Water Mains 4-in. to 36-in.
• M28 - Rehabilitation of Water Mains, Third Edition

ASTM Standards

• ASTM D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
• ASTM D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
• ASTM D2683: Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing.
• ASTM D2737 Standard Specification for Polyethylene (PE) Plastic Tubing
• ASTM D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
• ASTM D3035: Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter.
• ASTM D3261: Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing.
• ASTM D3350: Standard Specification for Polyethylene Plastic Pipe and Fittings Materials
• ASTM F714: Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter.
• ASTM F905: Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
• ASTM F1055: Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing.
• ASTM F1290: Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
• ASTM F1533 Standard Specification for Deformed Polyethylene (PE) Liner
• ASTM F1804 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation 
• ASTM F2164: Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
• ASTM F2206: Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
• ASTM F2263: Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
• ASTM F2620: Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
• ASTM F3183: Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint
• ASTM F3190: Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings

CSA Standards

• CSA B137.1: Polyethylene Pipe, Tubing, and Fittings for Cold-Water Pressure Services.

NAVFAC Unified Facilities Guide Specifications

• UFGS-33-11-00 Water Utility Distribution Piping

NSF

• NSF/ANSI 14 Compounds
• NSF 61:
• NSF 14:
• AWWA C901 - NSF 61 / NSF 14
• AWWA C906 - NSF 61 / NSF 14
• Health Effects of HDPE Pipes and Fittings for Potable Water Applications
• Water Plumbing Systems: NSF Breaks Down Study Results
• NSF Reviews of Studies on PEX May 2021
• Understanding The Safety Of Using Plastic Pipes In The U.S. Service Line Replacement Project

FM Standards

• FM 1613: Polyethylene (PE) Pipe and Fittings for Underground Fire Protection

AWWA STDS on Taste & Odor Control

• B600 - Powdered Activated Carbon
• B601 - Sodium Metabisulfite
• B602 - Copper Sulfate
• B603 - Permanganates
• B604 - Granular Activated Carbon
• B605 - Reactivation of Granular Activated Carbon

Nuclear Regulatory Commission, NRC

• ASME Code Development Roadmap for HDPE Pipe in Nuclear Service

Trench-less

• ASTM F1962: Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
• ASTM F585: Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
• C622-19 - Pipe Bursting of Potable Water Mains 4-in. to 36-in.
• M28 - Rehabilitation of Water Mains, Third Edition

• Directional Drilling Recommendations
• EM 1110-2-2902, Conduits, Pipes, and Culverts associated with Dams and Levee Systems