Atalah A. (2006), "The Safe Distance between Large-Diameter Rock Pipe Bursting and Nearby Buildings and Buried Structures,"
ASCE Journal of Transportation Engineering. April 2006, Volume 132.
Atalah, A. (2004), "Ground Movement in Hard Rock Conditions Related to Pipe Bursting," ASCE Pipeline Specialty Conference,
San Diego, CA; August 2004.
Atalah, A. (2004), "The Ground Vibration Associated with Pipe Bursting in Rock Conditions," North American NO-DIG 04, Annual Conference
of the North American Society of Trenchless Technology, New Orleans, LA; March 2004.
Atalah, A. (2003), "The Ground Movement Associated With Pipe Bursting in Rock Conditions and its Impact on Nearby Utilities and Structures,"
International NO-DIG 03, Annual Conference of the North American Society of Trenchless Technology, Las Vegas, NV; April 2003.
Atalah, A. (2004), "The Ground Movement Associated With Large Diameter Pipe Bursting In Rock Conditions And Its Impact On Nearby Utilities And Structures,"
Bowling Green State University, Bowling Green, Ohio.
Atalah, A (2001) 'Cost Comparison between Open Cut Construction and Pipe Bursting for the Repair of Tripler Army Medical Center Sewer Line Project',
North American NO-DIG 2001, Annual Conference of the North American Society of Trenchless Technology, Nashville, TN.
Atalah, A. (1998). "The Effect of Pipe Bursting on Nearby Utilities Pavement, and Structures." Dissertation in Partial Fulfillment of the
Requirement for the Degree Doctor of Engineering, UMI Microform 9829093.
Atalah, A. (1996), "Design of Microtunneling and Jacking Pipe," ASCE Specialty Conference-Pipeline Crossings 1996, Burlington, VT; June 1996.
Atalah, A., T. Iseley, and D. Bennett (1994), "Estimating the Required Jacking Force," NO-DIG 94, Annual Conference of the North American Society
of Trenchless Technology, Dallas, TX; April 1994.
Boot J., G. Woods and R. Streatfield, (1987), On-line Replacement of Sewer Using Vitrified Clayware Pipes, Proceedings of No-Dig International '87,
Bennett R. D. and S. Ariaratnam, S. Khan (2005), "Pipe Bursting Good Practices," North American Society for Trenchless Technology, Arlington, VA.
Fraser, R., N. Howell and R. Torielli (1992) 'Pipe Bursting: The Pipeline Insertion Method', Proceedings of No-Dig International '92, Washington
DC, ISTT, UK.
Hayward P. (2002) 'Pipe Replacement Systems', Nodig International, June 2002, page 15
Howell, N. (1995) "The PE pipe Philosophy for Pipeline Renovation", Proceedings of No-Dig International 95, Dresden, Germany, ISTT, UK
Jadranka Simicevic, Raymond L. Sterling (2001). Guidelines for Pipe Bursting TTC Technical Report #2001.02, pp 47
Lindeburg, M. (1992) Civil Engineering Reference Manual for the PE Exam. Professional Publications Inc.
Najafi, M. (2007), "Pipe Bursting Projects - ASCE Manuals and Reports on Engineering Practice No. 112," American Society of Civil
Engineers, Reston, VA.NASTT (2008), Glossary of Terms, URL http://nastt.org/glossary.php?index=P, North American Society for Trenchless
Technology, Arlington, VA.
PIM Corporation (2007), "ConSplit ductile pipelines quickly and cost-effectively,"" URL http://www.pimcorp.com/consplit.html,
Poole A., R. Rosbrook, and J. Reynolds (1985) 'Replacement of Small-Diameter Pipes by Pipe Bursting', Proc. of 1st Intl. Conf. on
Trenchless Construction for Utilities: No-Dig '85, April 16-18, London, UK.
Project Management Institute Inc. (2004), 'A Guide to the Project Management Body of Knowledge', Project Management Institute Inc.,
Newtown Square, Pennsylvania, USA.
Rogers, C. (1995) Ground Displacements Caused by Trenching and Pipe Bursting, Loughborough University of Technology, UK.
Rogers, C. and D. Chapman (1995). 'Ground Movement Caused by Trenchless Pipe Installation Techniques', Proc. Transportation Research Board,
74th Annual Meeting, Jan. 95, Washington DC.
Stein D., K Mollers, and R. Bielecki, 1989. Microtunneling: Installation and Renewal of Non-Man-Size Supply and Sewage Lines by the
Trenchless Construction Method, pp. 302-310, Ernst & Sohn, Berlin, Germany.
Wiss, J. F., 1980, "Construction Vibration Ã¢â‚¬â€œ State of the Art," ASCE National Convention, Portland, Oregon, April 14-18, 1980.